I lager Het produkt
USQ4A22P
USQ4A22P SQ4-A22-P PANASONIC Safety Liquid Leak Sensor, chemical liquids, Category 1, Plc, SIL1, PNP output,..
$0.00
USD
i lager
Viktiga specifikationer
Punkt:
Specifications
Kabel:
0.1 mm24-core PFA cabtyre cable, 2 m6.562 ftlong
Vikt:
Net weight: 45 g approxGross weight: 110 g approx
Detaljer:
Sensor [For chemical liquid]
Leverantörsinformation
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Punkt | Specifications |
| Kabel | 0.1 mm24-core PFA cabtyre cable, 2 m6.562 ftlong |
| Vikt | Net weight: 45 g approxGross weight: 110 g approx |
| Detaljer | Sensor [For chemical liquid] |
| Produkt | Safety Liquid Leak Sensor [Control Category 4 PLe SIL3] |
| Material | Enclosure: PFA |
| Skydd | IP65 / IP67 (IEC) |
| Artikelnummer | SQ4-A22-P |
| Produktnamn | Safety Liquid Leak Sensor [Control Category 4 PLe SIL3] SQ4 |
| Spänning | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Produktnummer | SQ4-A22-P |
| Avkännande objekt | Sulfuric acid, Hydrochloric acid,Phosphoric acid, Ammonia, Fluorinert (Note 2), Galden (Note 2), Hydrofl uoric acid etc. (Note 3)(Note 1) Highly viscous liquid may not be stably detected.(Note 2) The agents mentioned above are examples. It may not be detected depending on viscosity the agent.Before using this device, check the detecting liquid and installation condition.(Note 3) Fluorinert is the world wide trademark of 3M. Galden is the registered trademark of Solvay. |
| Omgivande luftfuktighet | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Emitterande element | Infrared LED (modulated) |
| Omgivningstemperatur | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed) (Note) Storage: -10 to +55 ℃+14 to +131 ℉(Note) Liquid being detected should be also kept within the rated ambient temperature range. |
| Nuvarande förbrukning | 30 mA or less |
| Utnyttjandekategori | DC-12, DC-13 |
| Detektionsutgång (läckagedetektering) | PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: Same as the supply voltage (between detection output and +V)- Residual voltage: 2.5 V or less (at 50 mA source current) |
| Detekteringshjälputgång (initial detektering) | PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: Same as the supply voltage (between detection auxiliary output and +V)- Residual voltage: 2.5 V or less (at 50 mA source current) |
| Detektionsutgång (läckagedetektering): Svarstid | 10 ms or less |
| Detektionsutgång (läckagedetektering): Utgångsdrift | ON when normal condition or initial detection, OFF when detection leakage or wrong installation |
| Detektionsutgång (initial detektering): Svarstid | 50 ms or less |
| Detektionsutgång (läckagedetektering): Kortslutningsskydd | Incorporated |
| Detektionsutgång (initial detektering): Utgångsdrift | ON when normal condition, OFF when initial detection or accidental leakage |
| Detektionsutgång (initial detektering): Kortslutningsskydd | Incorporated |
Produktbeskrivning
Safety Sensor liquid detection, chemical liquids, Category 1, Ple, SIL1, PNP, cable 2m
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
