I lager Het produkt
USGB1MAG5
USGB1MAG5 SG-B1-MA-G5 PANASONIC Safety door switch (Ultra-slim) with solenoid interlock, Magnet lock, 5m cab..
$0.00
USD
i lager
Viktiga specifikationer
:
Ue
likström:
Resistive load (DC-12)
Dvs.:
Main circuit, look monitor circuit
B10D:
2,000,000(ISO 13849-1 Annex C Table C.1)
Leverantörsinformation
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Ue | |
| likström | Resistive load (DC-12) |
| Dvs. | Main circuit, look monitor circuit |
| B10D | 2,000,000(ISO 13849-1 Annex C Table C.1) |
| Punkt | Specifications |
| Kabel | UL style 2464, No.22 AWG 12-core |
| Vikt | Approx. 600 g |
| Detaljer | Magnet lock type |
| Produkt | Ultra-slim Safety door switch with solenoid interlock |
| Material | Enclosure : PA66 |
| Skydd | IP 67 (IEC 60529) |
| Artikelnummer | SG-B1-MA-G5 |
| Kabellängd | 5m16.404 ft |
| Produktnamn | Ultra-slim Safety door switch with solenoid interlock SG-B1 |
| Huvudkontakter | 1NC + 1NC |
| Produktnummer | SG-B1-MA-G5 |
| Förreglingskraft | 500 N min. (GS-ET-19)(Note): The actuator locking strength is rated at 500 N of static load. Do not apply a load higher than the rated value.Do not apply a load higher than the rated value.When a higher load is expected to work on the actuator, provide an additional system consisting of another safety switch without lock (such as the SG-A1 safety switch) or a sensor to detect door opening and stop the machine. |
| Stötdämpning | Malfunction : 100 m/s2, Destruction : 1,000 m/s2 |
| Kontaktmotstånd | 300 mΩ max. (initial value, 1 m3.281 ftcable)700 mΩ max. (initial value, 5 m16.404 ftcable) |
| Driftsfrekvens | 900 operations/hour |
| Tillämpliga standarder | EN 60947-5-1, GS-ET-19 |
| Direkt öppningskraft | 60 N min. |
| Dörrövervakningskrets | AC |
| Vibrationstålighet | Malfunction : 10 to 55 Hz, half amplitude 0.35 mm0.014 inDestruction : 30 Hz, half amplitude 1.5 mm0.059 in |
| Direkt öppningsrörelse | 8 mm0.315 inmin. |
| Dörrövervakningskontakter | 2NC |
| Elektrisk hållbarhet | 100,000 operations min.(900 operations/hour,AC-12 125 V 2A, DC-12 125 V 0.4 A)1,000,000 operations min.(900 operations/hour,24 V AC/DC 0.1 A resistive load) |
| Lås monitorkontakter | 1NC |
| Mekanisk hållbarhet | 1,000,000 operations min. (GS-ET-19) |
| Termisk ström (Ith) | ・Ambient temperature : -25 to +35 ℃-13 to +95 ℉2.5 A (up to 2 circuits)1.0 A (3 or more circuits)・Ambient temperature : 35 to +50 ℃95 to +122 ℉1.0 A (1 circuit)0.5 A (2 or more circuits) |
| Tillämpliga bestämmelser | CE Marking [Machinery Directive (2006/42/EC), RoHS Directive], UKCA Marking [Supply of Machinery (Safety) Regulations (2008 No.1597), RoHS Regulations] |
| Induktiv last (AC-15) | - |
| Induktiv last (DC-13) | 1A |
| Ställdonets driftshastighet | 0.05 to 1.0 m/sec. |
| Nominell isolationsspänning (Ui) | 300 V (Door monitor circuit)150 V (Main, Lock monitor circuit)30 V (Between ground and LED, solenoid circuit) |
| Driftsförhållanden: Höjd | 2,000 m6,561.68 ftmax. |
| Skyddsklass för elektriska stötar | Class II (IEC 61140)(Note), 回(double insulated)(Note): Basic insulation of 2.5 kV, 1.5 kV impulse withstand voltage is ensured between different contact circuits and between contact circuits and LED or solenoid in the enclosure. When both SELV (safety extra low voltage) or PELV (protective extra low voltage) circuits and other circuits (such as 230 V AC circuits) are used for the solenoid power and contact circuits at the same time, the SELV or PELV requirements are not met any more. |
| Kortslutningsskyddsanordning | Use 250 V / 10 A fast acting type fuse |
| Impulshållfasthetsspänning (Uimp) | 2.5 kV (Door monitor circuit)1.5 kV (Main, Lock monitor circuit)0.5 kV (Between ground and LED, solenoid circuit) |
| Solenoid / Indikator: Indikator | Green LED |
| Solenoid / Indikator: Nominell ström | 110 mA (solenoid 100 mA, LED 10 mA : initial value) |
| Driftsförhållanden: Omgivningsfuktighet | 45 to 85 % RH |
| Driftsförhållanden: Föroreningsgrad | 3 (Inside 2) |
| Solenoid/indikator: Slå på spänningen | Rated voltage × 85 % max. (at 20 ℃68 ℉) |
| Solenoid/indikator: Stäng av spänningen | Rated voltage × 10 % min. (at 20 ℃68 ℉) |
| Tillämpliga standarder: Standarder för användning | IEC 60204-1 / EN 60204-1, ISO 14119, EN ISO 14119, IEC 60947-5-1, UL 508, CSA C22.2 No.14 |
| Driftsförhållanden: Omgivningstemperatur | -25 to +50 ℃-13 to +122 ℉(No dew condensation or icing allowed)Storage : -40 to +80 ℃-40 to +176 ℉ |
| Solenoid / Indikator: Nominell driftspänning | DC 24 V 100% duty cycle |
| Nominell driftspänning (Ue) / Nominell driftström (Ie) | Ue30V125V250VIeMain circuit, look monitor circuitACResistive load (AC-12)-2A-Inductive load (AC-15)-1A-DCResistive load (DC-12)2A0.4A-Inductive load (DC-13)1A0.22A-Door monitor circuitACResistive load (AC-12)-2.5A1.5AInductive load (AC-15)-1.5A0.75ADCResistive load (DC-12)2.5A1.1A0.55AInductive load (DC-13)2.3A0.55A0.27A |
Produktbeskrivning
Safety limit switch (Ultra-narrow) for door with interconnection and magnetic lock, 5m cable, main 1NC+1NC, Monitor 2NC+1NC
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
