I lager Het produkt
UPX24ES
UPX24ES PX24ES PX-24ES PANASONIC PX-2, auxiliary sensor type, ext. control F.,3 m, NPN, 10-31 V
$0.00
USD
i lager
Viktiga specifikationer
Punkt:
Specifications
Kabel:
For input and output: 0.18 mm29-core (PX-24ES and PX-23ES: 12-core) cabtyre cable, 0.5 m1.640 ftlongFor auxiliary sensor connection: 0.18 mm210-core connector attached cabtyre cable, 0.5 m1.640 ftlong10-core connector attached cabtyre cable, 0.5 m 1.640 ft long
Vikt:
Net weight: 220 g approx.Gross weight: 400 g approx.
Detaljer:
Main sensors(Auxiliary sensor connectable model With external control function)
Leverantörsinformation
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Punkt | Specifications |
| Kabel | For input and output: 0.18 mm29-core (PX-24ES and PX-23ES: 12-core) cabtyre cable, 0.5 m1.640 ftlongFor auxiliary sensor connection: 0.18 mm210-core connector attached cabtyre cable, 0.5 m1.640 ftlong10-core connector attached cabtyre cable, 0.5 m 1.640 ft long |
| Vikt | Net weight: 220 g approx.Gross weight: 400 g approx. |
| Detaljer | Main sensors(Auxiliary sensor connectable model With external control function) |
| Produkt | Long Range & Wide Area Photoelectric Sensor |
| Material | Enclosure: ABS, Lens: Acrylic, Cover: Polycarbonate |
| Åtföljande | MS-PX-2 (Main sensor mounting bracket): 1 set, Adjusting screwdriver: 1 pc., Matrix chart for sensing areas and external inputs: 1 sheet |
| Hysteres | 15 % or less of operation distance(Note：The sensing range is specified for white non-glossy paper (300 x 300 mm11.811 × 11.811 in) as the object.) |
| UT1, UT2 | NPN open-collector transistor・Maximum sink current: 100 mA・Applied voltage: 40 V DC or less between OUT 1 / OUT 2 and 0 V)・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)* OUT1(OR circuit among the effective center, left, right, adjacent left / right OUT 1 areas and the effective auxiliary left / right areas)OUT2(OR circuit among the effective center, left and right OUT 2 areas) |
| Skydd | IP65 (IEC) |
| Artikelnummer | PX-24ES |
| Produktnamn | Long Range & Wide Area Photoelectric Sensor PX-2 |
| Avkänningsområde | Four sensing areas are selectable with dip switches, and eight sensing areas are selectable with external inputs. |
| Svarstid | 80 ms or less |
| Produktnummer | PX-24ES |
| Sömnfunktion | Operating / sleep selectable with external input |
| Matningsspänning | 10 to 31 V DC including ripple |
| Kabelförlängning | Extension up to total 100 m328.084 ft(10 m32.808 ftfor auxiliary sensor connection) is possible with 0.3 mm2, or more, cable. |
| Omgivande luftfuktighet | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Emitterande element | Infrared LED (Peak emission wavelength: 950 nm0.037 mil, modulated) |
| Stötdämpning | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Energiförbrukning | Under operation: 1.5 W or less, Under sleep condition: 0.3 W or less (without auxiliary sensor)(Note：Obtain the current consumption by the following calculation.Current consumption = Power consumption ÷ Supply voltage(e.g.) When the supply voltage is 12 V, the current consumption (operating condition) is: 1.5 W ÷ 12 V = 0.125 A = 125 mA) |
| Omgivande belysningsstyrka | Incandescent light: 3,000 lx or less at the light-receiving face |
| Omgivningstemperatur | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃-4 to +158 ℉ |
| Känslighetsjusterare | Continuously variable adjusters (OUT 1, adjacent right OUT 1, adjacent left OUT 1 and OUT 2 areas are adjusted independently.) |
| Vibrationstålighet | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (20 G max.) in X, Y and Z directions for two hours each |
| Isoleringsmotstånd | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Spänningshållbarhet | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| OUT1, OUT2: Utgångsdrift | Selectable either Light-ON or Dark-ON with a switch (Output operation of OUT 1 and OUT 2 is the same.) |
| Överensstämmelse med CE-märkningsdirektivet | EMC Directive, RoHS Directive |
| Utgång för övervakning av främmande ljus | NPN open-collector transistor・Maximum sink current: 100 mA・Applied voltage: 40 V DC or less (between extraneous light monitor output and 0 V)・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Driftindikatorer: OUT 1-område | Red LED (lights up when the beam is received in the effective OUT 1 areas) |
| Driftindikatorer: OUT 2-område | Yellow LED (lights up when the beam is received in the effective OUT 2 areas) |
| OUT1, OUT2: Kortslutningsskydd | Incorporated |
| Avkänningsområde (OUT 1 och OUT 2 områden) | 3 m9.843 ft(Note：The sensing range is specified for white non-glossy paper (300 x 300 mm11.811 × 11.811 in) as the object.) |
| Extern känslighetsjusteringsfunktion | Sensitivity adjustment is possible with an analog input. |
| Automatisk störningsskyddsfunktion | Optical interference from up to 25 units is prevented. |
| Utgång för övervakning av främmande ljus: Utgångsdrift | ON when modulated beam other than its own (including auxiliary sensor's) light is received |
Produktbeskrivning
PX-2 Series. Expandable sensor for guided vehicles, external control function, range 3 m., NPN, power supply 10-31 VDC
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
