I lager Het produkt
ULX101Z
ULX101Z LX101Z LX-101-Z PANASONIC Digtal mark sensor, teach-in, NPN, M12 connector
$0.00
USD
i lager
Viktiga specifikationer
Punkt:
Specifications
Kabel:
(Note) Mating cable is not supplied with the plug-in connector type. Please order it separately.
Vikt:
Net weight: 55 g approx.Gross weight: 120 g approx.
Detaljer:
Plug-in connector type
Leverantörsinformation
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Punkt | Specifications |
| Kabel | (Note) Mating cable is not supplied with the plug-in connector type. Please order it separately. |
| Vikt | Net weight: 55 g approx.Gross weight: 120 g approx. |
| Detaljer | Plug-in connector type |
| Produkt | Digital Mark Sensor |
| Material | Enclosure: PBTDisplay cover: PolycarbonateOperation buttons: Silicone rubberLens: GlassLens holder: Aluminum |
| Åtföljande | M4 (length 30 mm1.181 in) screw with washers: 2 pcs. |
| Punktstorlek | 1 x 5 mm 0.039 x0.197 in(at 10 mm0.394 insetting distance) |
| Skydd | IP67 (IEC) |
| Artikelnummer | LX-101-Z |
| Produktnamn | Digital Mark Sensor LX-100 |
| Utgång 1 (UT) | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current) |
| Utgång 2 (UT) | - |
| Svarstid | Mark mode: 45 micro s or lessColor mode: 150 micro s or less |
| Avkänningsområde | 10 ± 3 mm0.394 ± 0.118 in |
| Produktnummer | LX-101-Z |
| Matningsspänning | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Undervisningsinsatser | NPN non-contact input- Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less)- Input impedance: 10 kOhm approx. |
| Timerfunktion | Incorporated with variable ON-delay / OFF-delay timer,switchable either effective or ineffective(Timer period: 1 to 500 ms, 9 levels variable) |
| Kabelförlängning | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Digital display | 4-digit red LED display |
| Omgivande luftfuktighet | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Emitterande element | Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm0.025 mil/ 525 nm0.021 mil/ 470 nm0.019 mil) |
| Stötdämpning | 500 m/s2acceleration (50 G approx.) in X, Y and Z directionsthree times each |
| Omgivande belysningsstyrka | Incandescent light: 3,000 lx or less at the light-receiving face |
| Omgivningstemperatur | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Nuvarande förbrukning | Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage) |
| Känslighetsinställning | Mark mode: 2-level teaching / Full-auto teachingColor mode: 1-level teaching |
| Vibrationstålighet | 10 to 500 Hz frequency, 3.0 mm0.118 indouble amplitude (max. 20 G) in X, Y and Z directions for two hours each |
| Spänningshållbarhet | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Utgång 1: Utgångsdrift | Mark mode: Light-ON / Dark-ON (Auto-setting on teaching)Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching) |
| Utgång 2: Utgångsdrift | - |
| Överensstämmelse med CE-märkningsdirektivet | EMC Directive, RoHS Directive |
| Utgång 1: Kortslutningsskydd | Incorporated |
| Utgång 2: Kortslutningsskydd | - |
| Finjusteringsfunktion för känslighet | Incorporated |
Produktbeskrivning
Sensor for mark/color detection, automatic RGB optical LED selection, connector, NPN
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
