Servicetider: måndag till fredag ​​9:00-18:00
ULS501PC2 - ULS501PC2 LS-501P-C2 PANASONIC Laser Amplifier (with display), cable type 2m, 2 outputs PNP + analog 4 to 20..
I lager Het produkt

ULS501PC2

ULS501PC2 LS-501P-C2 PANASONIC Laser Amplifier (with display), cable type 2m, 2 outputs PNP + analog 4 to 20..

$0.00 USD
i lager
Viktiga specifikationer
Punkt: Specifications
Kabel: 0.2mm2 6-core cabtyre cable, 2 m 6.562 ft long(Note:Cable cannot be extended.)
Vikt: Net weight: 75 g approx.Gross weight: 110 g approx.
Detaljer: Amplifiers(Cable type)
Leverantörsinformation
PANASONIC
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support

Tekniska specifikationer

Parameter Värde
Punkt Specifications
Kabel 0.2mm2 6-core cabtyre cable, 2 m 6.562 ft long(Note:Cable cannot be extended.)
Vikt Net weight: 75 g approx.Gross weight: 110 g approx.
Detaljer Amplifiers(Cable type)
Produkt Amplifier-separated Type Digital Laser Sensor
Material Enclosure: PolycarbonateCover: PolycarbonateSwitch: Polyacetal
Åtföljande FX-MB1 (Amplifier protective seal): 1 set
Skydd IP40(IEC)
Artikelnummer LS-501P-C2
Produktnamn Amplifier-separated Type Digital Laser Sensor LS-500
Svarstid H-SP: 60 micro s or less, FAST: 150 micro s or less, STD: 250 micro s or less, LONG: 500 micro s or less, U-LG: 5 ms or less, HYPR: 24 ms or less selectable
Extern ingång PNP non-contact input- Signal condition High: +4 Vto+V DC(sink current 3.0 mA or less), Low: 0 to +0.6 V DC or open- Input impedance: 10 kOhm approx.(Note:Select either sensing output 2 or external input.)
Produktnummer LS-501P-C2
Matningsspänning 12 to 24 V DC +10-15% Ripple P-P 10 % or less
Timerfunktion OFF-delay timer, ON-delay timer, ONE-SHOT timer, ON / OFF-delay timer, ON-delay / ONE-SHOT timer,switchable either effective of ineffective, with variable timer periodOFF-delay timer, ON-delay timer, ONE-SHOT timer,switchable either effective of ineffective, with variable timer period
Kabelförlängning Extension up to total 100 m 328.084 ft is possible with 0.3mm2, or more, cable.
Digital display 8-digit 7-segment digital display (4-digit green LED + 4-digit red LED), MODE indicator (Yellow LED): L/D, CUST, PRO
Omgivande luftfuktighet 35 to 85 % RH, Storage: 35 to 85 % RH
Stötdämpning 98 m/s2acceleration (10 G approx.) in X, Y and Z directions for five times each
Logisk operation Between sensing output 1 and calculation target: Disabled / and / or / xor, selectableCalculation target: Sensing output 2 / adjacent upstream amplifier (sensing output 1) / external input, selectable
Energiförbrukning Normal operation: 1,200 mW or less (Current consumption 50 mA or less at 24 V supply voltage,excluding monitor current output)ECO mode: 980 mW or less (Current consumption 40 mA or less at 24 V supply voltage,excluding monitor current output)
Omgivningstemperatur -10 to +55degrees + 14 to 131 degrees Fahrenheit (If 4 to 7 units are mounted close together, -10 to +50 degrees +14 to +122 degrees Fahrenheit ; if 8 to 12 units are mounted close together, -10 to +45 degrees +14 to +113 degrees Fahrenheit )(No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit
Driftsindikator Orange LED (lights up when sensing output 1 or sensing output 2 is ON)
Känslighetsinställning 2-level teaching / limit teaching / full auto teaching / manual adjustment
Timerfunktion: Tid Timer range '' ms'': 0.5 ms approx., 1 to 9,999 ms approx., in approx. 1 ms intervalsTimer range '' sec'': 0.5 sec. approx., 1 to 32 sec. approx., in approx. 1 sec. intervalsTimer range '' 1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., in approx. 0.1 ms intervals, Set separately for each output.
Vibrationstålighet 10 to 150 Hz frequency, 1.5 mm double amplitude or maximum acceleration 98 m/s2in X, Y, and Z direction for 2 hours each.
Isoleringsmotstånd 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Regelefterlevnad EMC Directive, RoHS Directive
Övervaka strömutgång Output current: Approx. 4 to 20 mA (H-SP, FAST, STD: at 0 to 4,000 indication)Response time: 2 ms or lessZero point: 4 mA plus or minus 1 % F.S.Span: 16 mA plus or minus 5 % F.S.Linearity: plus or minus 3 % F.S.Load resistance: 0 to 250 Ohm
Extern ingångsfunktion Laser emission halt / teaching (full-auto teaching, limit teaching, 2 point teaching) / logic operation setting / copy lock /display adjustment / data bank load / data bank save, selectable
Indikator för utgångsval Yellow LED (lights up when output is selected)
Laseremissionsindikator Green LED (lights up during laser emission)
Spänningshållbarhet 1,000 V AC for one min. between all supply terminals connected together and enclosure
Indikeringsområde för infallande ljus H-SP/FAST/STD: 0 to 4,000LONG/U-LG/HYPR: 0 to 9,999
Givarutgångar (givarutgång 1, 2) PNP open-collector transistor・Maximum source current: 50 mA (Note:25 mA if 5 or more amplifier are connected in cascade (excluding cable extension).)・Applied voltage: 30 V DC or less (between output and +V)・Residual voltage: 2 V or less (at max. source current)(Note:Select either sensing output 2 or external input as the connector type.)
Inställning av avkänningsutgång: Avkänningsutgång 1 Normal mode, differential mode, hysteresis mode, window comparator mode, selectable
Inställning av avkänningsutgång: Avkänningsutgång 2 Normal mode, differential mode, hysteresis mode, self-diagnostic output mode, answer-back output mode, selectable(Note:Select either sensing output 2 or external input.)
Automatisk störningsskyddsfunktion Incorporated(Note:Number of units that can be mounted close together: 0 for H-SP; 2 for FAST; 4 for STD, LONG, U-LG, or HYPR)
Givarutgångar (givarutgång 1, 2): Utgångsdrift Selectable either Light-ON or Dark-ON
Givarutgångar (givarutgång 1, 2): Kortslutningsskydd Incorporated

Produktbeskrivning

LS500. Laser Amplifier (with display), 2m cable, 2 PNP + analog outputs
Viktiga funktioner
  • Industriell kvalitet
  • RoHS-kompatibel
  • CE-certifierad
  • 1 års garanti

Produktdokument

Datablad

Tekniska specifikationer och prestandadata

Användarmanual

Installations- och bruksanvisning

Top