I lager Het produkt
ULS401
ULS401 LS401 LS-401 PANASONIC Laser Amplifier (with display), connector type, 2 outputs NPN
$0.00
USD
i lager
Viktiga specifikationer
Punkt:
Specifications
Kabel:
-(Note) The cable is not supplied as an accessory. Be sure to use the optional quick-connection cables given below.Main cable (4-core): CN-74-C1 (cable length 1 m3.281 ft), CN-74-C2 (cable length 2 m6.562 ft), CN-74-C5 (cable length 5 m16.404 ft)Sub cable (2-core): CN-72-C1 (cable length 1 m3.281 ft), CN-72-C2 (cable length 2 m6.562 ft), CN-72-C5 (cable length 5 m16.404 ft)
Vikt:
Net weight: 15 g approxGross weight: 20 g approx
Detaljer:
Amplifier (Connector type)
Leverantörsinformation
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Punkt | Specifications |
| Kabel | -(Note) The cable is not supplied as an accessory. Be sure to use the optional quick-connection cables given below.Main cable (4-core): CN-74-C1 (cable length 1 m3.281 ft), CN-74-C2 (cable length 2 m6.562 ft), CN-74-C5 (cable length 5 m16.404 ft)Sub cable (2-core): CN-72-C1 (cable length 1 m3.281 ft), CN-72-C2 (cable length 2 m6.562 ft), CN-72-C5 (cable length 5 m16.404 ft) |
| Vikt | Net weight: 15 g approxGross weight: 20 g approx |
| Detaljer | Amplifier (Connector type) |
| Produkt | Digital Laser Sensor |
| Material | Enclosure: Heat-resistant ABSTransparent cover: PolycarbonatePush button switch: AcrylicJog switch: ABS |
| Artikelnummer | LS-401 |
| Produktnamn | Digital Laser Sensor LS-400 |
| Svarstid | 80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch |
| MODE-indikator | RUN: Green LEDTEACH, L/D, TIMER, CUST, PRO: Yellow LED |
| Produktnummer | LS-401 |
| Matningsspänning | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Timerfunktion | Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective. |
| Kabelförlängning | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Digital display | 4 digit (green) + 4 digit (red) LED display |
| Omgivande luftfuktighet | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Välj indikator | Yellow LED(lights up when either output 1 or output 2 is selected) |
| Stötdämpning | 98 m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| Omgivningstemperatur | -10 to +55 ℃+14 to +131 ℉(If 4 to 7 units are mounted close together: -10 to +50 ℃+14 to +122 ℉, if 8 to 16 units are mounted close together: -10 to +45 ℃+14 to +113 ℉)(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Nuvarande förbrukning | Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage) |
| Driftsindikator | Orange LED (lights up when output 1 and output 2 are ON) |
| Känslighetsinställning | Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustmentWindow comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentHysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentDifferential mode: 5-level settings |
| Timerfunktion: Tid | 1 to 9,999 ms |
| Vibrationstålighet | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Isoleringsmotstånd | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Laseremissionsindikator | Green LED (lights up during laser emission) |
| Spänningshållbarhet | 1,000 V AC for one min.between all supply terminals connected together and enclosure |
| Utgångar (Utgång 1, Utgång 2) | NPN open-collector transistor- Maximum sink current: 100 mA (Note)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less [at 100 mA (Note) sink current](Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade. |
| Finjusteringsfunktion för känslighet | Incorporated |
| Automatisk störningsskyddsfunktion | Incorporated[Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode)] |
| Utgångar (utgång 1, utgång 2): Utgångsdrift | Selectable either Light-ON or Dark-ON, with jog switch |
| Utgångar (utgång 1, utgång 2): Kortslutningsskydd | Incorporated |
| Extern ingång (Laseremissionsstopp Helautomatisk inlärning / Gränsinlärning) | - |
Produktbeskrivning
LS400 series digital laser amplifier, NPN, connector
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
