I lager Het produkt
UHLC2CEP
UHLC2CEP HL-C2CE-P PANASONIC Control unite HL-C2, low resolution, -5 to +5V, 4-20mA, PNP-type
$0.00
USD
i lager
Viktiga specifikationer
Punkt:
Specifications
Vikt:
450 g approx.
Detaljer:
Controller
Produkt:
Ultra High-speed High-precision Laser Displacement Sensor
Leverantörsinformation
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Punkt | Specifications |
| Vikt | 450 g approx. |
| Detaljer | Controller |
| Produkt | Ultra High-speed High-precision Laser Displacement Sensor |
| Material | Case: Polycarbonate |
| Åtföljande | USB cable (2 m 6.562 ft long): 1 pc.Short bracket: 1 pc. |
| Artikelnummer | HL-C2CE-P |
| Återställ ingång | Reset is done when connected to external power (+).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Larmutgång | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between alarm output and +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| Produktnamn | Ultra High-speed・High-precision Laser Displacement Sensor HL-C2 |
| Tidsingång | ON at/during connection to external power (+)(depending on analysis mode)Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Samplingsfrekvens | 10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms |
| Strobe-utgång | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between strobe output to +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| Produktnummer | HL-C2CE-P |
| Matningsspänning | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| Nollställningsingång | Zero set is ON when connected with external power (+).Zero set turns to OFF after continuously connected to external power (+) for one second.Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| Indikator: Ström | Green LED (lights up at power on) |
| Nuvarande förbrukning | 500 mA approx. at 2 sensor heads connected350 mA approx. at 1 sensor head connected(100 mA approx. is additionally required when the mini console is connected) |
| Indikator: Larm 1 | Red LED (lights up when OUT1 can not be measured due to insufficient amount of light) |
| Indikator: Larm 2 | Red LED (lights up when OUT2 can not be measured due to insufficient amount of light) |
| Laserkontrollingång | Laser emission is stopped when connected to external power (+).Laser is emitted immediately after opened.Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Minnesändringsingång | Memory is specified when connected to external power (+).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Anslutningsbart sensorhuvud | Number of connectable units: Max. 2 units. |
| Fjärrlåsingång | Laser emission is delayed when connected to IL (+).Laser emission stop at openApplied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Analog utgång: Ström | Current output scale: 4 to 20 mA/F.S (initial value)Output range during normal status: 2 to 24 mAOutput at abnormal status: 1 mA or 25 mAResolution: 3 micro A, Linearity plus or minus 0.05% F.S.Load impedance: 250 Ohm max., Response delay time: 10 micro s approx.(Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value. |
| Analog utgång: Spänning | Voltage output scale: -5 to +5 V/F.S (initial value)Output range during normal status: -10.0 to +10.0 VOutput at abnormal status: -10.8 V or +10.8 VResolution: 2 mV, Linearity: plus or minus 0.05 % F.S.Max. 2 mA, output impedance 50 Ohm , Response delay time: 1.5 micro s/V approx.(Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value. |
| Bedömningsutgång (HI, GO, LO) | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between judgment output to +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| Larmutgång: Utgångsdrift | Opened when the amount of light is insufficient |
| Strobeutgång: Utgångsdrift | Opened at data determination |
| Larmutgång: Kortslutningsskydd | Incorporated |
| Strobeutgång: Kortslutningsskydd | Incorporated |
| Indikator: Sensorhuvud A Laserstrålning | Green LED (lights up during or immediately before laser emission of sensor head A) |
| Indikator: Sensorhuvud B Laserstrålning | Green LED (lights up during or immediately before laser emission of sensor head B) |
| Miljöbeständighet: Omgivande luftfuktighet | 35 to 85 %RH |
| Miljöbeständighet: Stötdämpning | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each |
| Miljöbeständighet: Omgivningstemperatur | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Bedömningsutgång (HI, GO, LO): Utgångsdrift | Opened at output operation |
| Miljöbeständighet: Vibrationsbeständighet | 10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each |
| Bedömningsutgång (HI, GO, LO): Kortslutningsskydd | Incorporated |
Produktbeskrivning
High performance analog laser low resolution controller, HL-C2 series, RS232 port, analog output ±5V/ 4 - 20mA, PNP digital output
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
