I lager Het produkt
UHGT1010
UHGT1010 HG-T1010 PANASONIC HG-T Laser Sensor Displacement. Head sensor standard, array of detection 10mm de..
$0.00
USD
i lager
Viktiga specifikationer
Punkt:
Specifications
Kabel:
0.2 m0.656 ft4-core shielded cable with round connectors
Detaljer:
Measurement width 10 mm0.394 in/ Standard type
Produkt:
Sensor heads
Leverantörsinformation
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Punkt | Specifications |
| Kabel | 0.2 m0.656 ft4-core shielded cable with round connectors |
| Detaljer | Measurement width 10 mm0.394 in/ Standard type |
| Produkt | Sensor heads |
| Material | Case: Die-cast aluminum, Light emitting and light receiving surfaces: Glass |
| Linjäritet | ±0.12 % F.S. (Installation distance: 20 mm0.787 in)±0.28 % F.S. (Installation distance: 100 mm3.937 in)(Note)Indicates an error with the ideal straight line of digital measured values. |
| Nettovikt | Emitter: 30 g approx., Receiver: 30 g approx. |
| Artikelnummer | HG-T1010 |
| Ljuskälla | Red semiconductor laser: Class 1 [IEC / EN / JIS / GB / KS / FDA](Note)This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3. |
| Produktnamn | Thru-beam Type Digital Displacement Sensor HG-T |
| Repeterbarhet | 1 μm0.039 mil(Installation distance: 20 mm0.787 in)2.5 μm0.098 mil(Installation distance: 100 mm3.937 in)5 μm0.197 mil(Installation distance: 500 mm19.685 in)(Note)This is the P-P value of digital measurement value with half shading at the middle position of the installation distance. |
| Produktnummer | HG-T1010 |
| Jordningsmetod | Capacitor grounding |
| Föroreningsgrad | 2 |
| Mätbredd | 10 mm0.394 in |
| Driftshöjd | 2,000 m6,561.68 ftor less(Note)Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Min. avkänningsobjekt | ø0.5 mmø0.020 in(Installation distance: 500 mm19.685 in)(Note)When the light is blocked at the center position of 500 mm19.685 ininstallation distance. |
| Driftsindikator | Emitter : Laser radiation indicator (Green)Receiver : Beam axis adjustment indicator (Orange / Green), Judgment output indicator (Orange / Green) |
| Tillämplig styrenhet | HG-TC101 (-P), HG-TC111 (-P), HG-TC113 |
| Installationsavstånd | 0 to 500 mm0 to 19.685 in |
| Regelefterlevnad | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), FDA regulations |
| Positionsdetekteringsmetod | CMOS-based |
| Temperaturegenskaper | ±0.03 % F.S./℃(Note)When the light is half-blocked at the center position of 100 mm3.937 ininstallation distance. |
| Miljöbeständighet: Skydd | IP67 (IEC) (Excluding connectors) |
| Miljöbeständighet: Omgivande luftfuktighet | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Miljöbeständighet: Stötdämpning | 196 m/s2acceleration in X, Y and Z directions three times each |
| Miljöbeständighet: Omgivande belysningsstyrka | Incandescent light: 5,000 ℓx or less at the light-receiving face(Note)When the sampling cycle of the controller is set to "standard sampling". |
| Miljöbeständighet: Omgivningstemperatur | -10 to +45 ℃+14 to +113 ℉(No dew condensation or icing allowed), Storage: -20 to +60 ℃-4 to +140 ℉ |
| Miljöbeständighet: Vibrationsbeständighet | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Miljöbeständighet: Isoleringsmotstånd | 20 MΩ or higher, using 250 V DC megger (between all terminals and case) |
Produktbeskrivning
HG-T Laser Displacement Sensor. Standard sensor head, 10mm detection array, detection range 0 to 500mm, repeatability 1μm
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
