I lager Het produkt
UFX501
UFX501 FX-501 PANASONIC Fiber amplifier, NPN, 1 digital output, double display, connector type
$0.00
USD
i lager
Viktiga specifikationer
Punkt:
Specifications
Kabel:
-
Produktion:
NPN open-collector transistor- Maximum sink current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)
Vikt:
Net weight: 15 g approx.Gross weight: 70 g approx.
Leverantörsinformation
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Punkt | Specifications |
| Kabel | - |
| Produktion | NPN open-collector transistor- Maximum sink current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| Vikt | Net weight: 15 g approx.Gross weight: 70 g approx. |
| Detaljer | Standard type |
| Produkt | Digital Fiber Sensor |
| Material | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| Åtföljande | FX-MB1 (Amplifier protection seal): 1 set |
| Skydd | IP40 (IEC) |
| Artikelnummer | FX-501 |
| Produktnamn | Digital Fiber Sensor FX-500 Ver.2 |
| Svarstid | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| Extern ingång | - |
| Produktnummer | FX-501 |
| Matningsspänning | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| Timerfunktion | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective |
| Kabelförlängning | - |
| Olika inställningar | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| Energiförbrukning | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage) |
| Omgivningstemperatur | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 16 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| Känslighetsinställning | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Utgång: Utgångspunkter | 1 point |
| Utgång: Utgångsoperation | Switchable either Light-ON or Dark-ON by L/D mode |
| Timerfunktion: Timerperiod | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| Emitterande element (modulerat) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Överensstämmelse med CE-märkningsdirektivet | EMC Directive, RoHS Directive |
| Utgång: Kortslutningsskydd | Incorporated |
| Funktion för inställning av utsläppsmängd | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| Störningsskyddsfunktion | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| Möjlig extern ingångsfunktion | - |
| Visningsområde för infallande ljusintensitet | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| Extern ingång (omkopplingsbar med utgång 2) | - |
Produktbeskrivning
FX-500 F Amplifier. Optical, NPN output, dual display, high sensitivity and detection distance, ultra-fast.
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
