I lager Het produkt
UFX102
UFX102 FX102 FX-102 PANASONIC Fiber amplifier, Long sensing range type, NPN, display, connector type
$0.00
USD
i lager
Viktiga specifikationer
Punkt:
Specifications
Produktion:
NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current)
Vikt:
Net weight: 15 g approx.Gross weight: 35 g approx.
Detaljer:
Long sensing range type
Leverantörsinformation
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Punkt | Specifications |
| Produktion | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current) |
| Vikt | Net weight: 15 g approx.Gross weight: 35 g approx. |
| Detaljer | Long sensing range type |
| Produkt | Digital Fiber Sensor |
| Material | Enclosure: PolycarbonateKey switch: PolycarbonateFiber lock lever: PBT |
| Åtföljande | FC-FX-1(Protection cover): 1 pc.(Note) Protection cover FC-FX-1 has been attached from the production at July, 2011. |
| Artikelnummer | FX-102 |
| Kabellängd | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Produktnamn | Digital Fiber Sensor FX-100 |
| Svarstid | Emission frequency 1: 2.5 ms or less (factory default setting)Emission frequency 2: 2.8 ms or lessEmission frequency 3: 3.2 ms or lessEmission frequency 4: 5.0 ms or less |
| Extern ingång | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +2 V DC(Source current 0.5 mA or less)- Input impedance: 10 kOhm approx. |
| Produktnummer | FX-102 |
| Matningsspänning | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Timerfunktion | ON-delay / OFF-delay timer, switchable either effective or ineffective[Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] |
| Digital display | 4 digits (green) + 4 digits (red) LCD display |
| Omgivande luftfuktighet | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Stötdämpning | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| Anslutningsmetod | Connector(Note) Connector attached cable CN-14A-C2 is not attached to the models that have no ''-CC2'' at the end of the model Nos.Make sure to use the optional connector attached cable CN-14A(-R)-Cx or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.(contact: SPHD-001T-P0.5, housing: PAP-04V-S). |
| Energiförbrukning | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
| Omgivande belysningsstyrka | Incandescent light: 3,000 lx or less at the light-receiving face |
| Omgivningstemperatur | –10 to +55 ℃+14 to +131℉(If 4 to 7 units are mounted close together: –10 to +50 ℃+14 to +122℉, if 8 to 16 units are mounted close together: –10 to +45 ℃+14 to +113℉) (No dew condensation or icing allowed),Storage: –20 to +70 ℃–4 to +158℉ |
| Driftsindikator | Orange LED (lights up when the output is ON) |
| Känslighetsinställning | 2-point teaching / Limit teaching / Full-auto teaching |
| Vibrationstålighet | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Isoleringsmotstånd | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Utgång: Utgångsoperation | Selectable either Light-ON or Dark-ON, at SET mode |
| Spänningshållbarhet | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Emitterande element (modulerat) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Överensstämmelse med CE-märkningsdirektivet | EMC Directive, RoHS Directive |
| Utgång: Kortslutningsskydd | Incorporated |
| Funktion för inställning av utsläppsmängd | 3-level + Auto setting (from production in December 2007) |
| Störningsskyddsfunktion | Incorporated Emission frequency selection method (Functions at emission frequency 1, 2, 3 or 4)(Note) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values. |
| Finjusteringsfunktion för känslighet | Incorporated |
Produktbeskrivning
FX100 Amplifier F. Long distance optics, NPN output, NOT including cable CN14AC2
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
