I lager Het produkt
UEXFC1
UEXFC1 EXFC1 EX-FC1 PANASONIC Simple wire-saving unit for up to 8 leak detection sensor EX-F60 / EX-F70 seri..
$0.00
USD
i lager
Viktiga specifikationer
Punkt:
Specifications
Kabel:
0.2 mm24-core cabtyre cable, 2 m6.562 ftlong
Produktion:
Relay contact 1a- Switching capacity: 30 V 1 A DC (resistive load)- Min. applied load: 10 mV 10 μA DC- Electrical lifetime: 100,000 switching operations or more (rated load, switching frequency 20 operations/min.)- Mechanical lifetime: 50 million switching operations or more (switching frequency 180 operations/min.)
Vikt:
Net weight: 85 g approx.
Leverantörsinformation
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Punkt | Specifications |
| Kabel | 0.2 mm24-core cabtyre cable, 2 m6.562 ftlong |
| Produktion | Relay contact 1a- Switching capacity: 30 V 1 A DC (resistive load)- Min. applied load: 10 mV 10 μA DC- Electrical lifetime: 100,000 switching operations or more (rated load, switching frequency 20 operations/min.)- Mechanical lifetime: 50 million switching operations or more (switching frequency 180 operations/min.) |
| Vikt | Net weight: 85 g approx. |
| Produkt | Simple wire-saving unit |
| Material | Enclosure: ABS, Unit mounting base: POM, Terminal part: PBT |
| Åtföljande | SL-CP1 (Snap male connector): 8 pcs., MS-SL-2 (Unit mounting base): 1 pc. |
| Ingångsnummer | 8 Nos. |
| Artikelnummer | EX-FC1 |
| Produktnamn | Leak Detection Sensor EX-F70/EX-F60 |
| Svarstid | 5 ms or less (excluding the response time of the sensor) |
| Produktnummer | EX-FC1 |
| Matningsspänning | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Kabelförlängning | Extension up to total less than 10 m32.808 ftis possible, with 0.3 mm2, or more, cable. |
| Omgivande luftfuktighet | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Indikatorer: Fel | Red LED x 8 (light up when the leak liquid is detected by a sensor connected to each channel or a sensor is mounted improperly) |
| Omgivningstemperatur | -10 to +60 ℃+14 to +140 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃- 4 to +158 ℉ |
| Nuvarande förbrukning | 50 mA or less (for the unit itself), 135 mA or less (including the sensor input current when all outputs of sensors are ON) |
| Indikatorer: Normal | Green LED x 8 (light up when the sensor is connected to each channel and the connection setting switch is set to ON) |
| Indikatorer: Utgång | Orange LED (lights up when the output relay is ON (normal)) |
| Tillämplig kontakt | SL-CP1 |
| Utgång: Utgångsoperation | The output relay is ON when the input signal from the sensor is ONNote : Even with only one leak detection sensor connected, an OFF signal is output if the sensor detects liquid leakage, or if the unit has been installed incorrectly. |
Produktbeskrivning
More details
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
