| Parameter | Värde |
|---|---|
| Punkt | Specifications |
| Produktion | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.0 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Detaljer | Chemical-resistant |
| Produkt | Leak Detection Sensor |
| Material | Enclosure: PFA |
| Skydd | IP67 (IEC) |
| Artikelnummer | EX-F62 |
| Produktnamn | Leak Detection Sensor EX-F70/EX-F60 |
| Svarstid | 50 ms or less |
| Produktnummer | EX-F62 |
| Avkännande objekt | Agent, such as Sulfuric acid, Hydrochloric acid, Phosphoric acid or Ammonia etc.Note : Highly viscous liquid may not be detected stably.Note : The agents mentioned above are examples. For details, please contact our office.Note : PVC mounting bracket may not be used depending on type or viscosity etc. of the agent. For details, please contact our office. |
| Matningsspänning | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Kabelförlängning | Extension up to total 50 m164.042 ft |
| FEL-indikator | Red LED (lights up when the leak liquid is detected, or the sensor is mounted improperly) |
| Omgivande luftfuktighet | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Emitterande element | Infrared LED (non-modulated) |
| NORMAL-indikator | Green LED (lights up when the sensor is mounted properly) |
| Omgivande belysningsstyrka | Incandescent light: 1,000 ℓx or less at the light-receiving face |
| Omgivningstemperatur | -10 to +60 ℃+14 to +140 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃- 4 to +158 ℉Note : Liquid being detected should also be kept within the rated ambient temperature range. |
| Nuvarande förbrukning | 15 mA or less |
| Utgång: Utgångsoperation | In normal state: ON, When leak detected or the sensor is mounted improperly: OFF |
| Utgång: Kortslutningsskydd | Incorporated |
Tekniska specifikationer och prestandadata
Installations- och bruksanvisning