I lager Het produkt
UDPHL113
UDPHL113 DPH-L113 PANASONIC Sensor head DPH-L113 for positive pressure, 0 to 1.0MPa, R1/4 male thread, cable..
$0.00
USD
i lager
Viktiga specifikationer
Punkt:
Specifications
Kabel:
0.2 mm23-core heat resistant cabtyre cable 2 m3.562 ftlong
Anmärkning:
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉.The sensor head can be used independently.
Vikt:
Net weight : 100 g approx., Gross weight : 150 g approx.
Leverantörsinformation
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Punkt | Specifications |
| Kabel | 0.2 mm23-core heat resistant cabtyre cable 2 m3.562 ftlong |
| Anmärkning | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉.The sensor head can be used independently. |
| Vikt | Net weight : 100 g approx., Gross weight : 150 g approx. |
| Detaljer | Sensor head |
| Produkt | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] |
| Material | Diaphragm : Stainless steel (SUS603), Pressure port : Stainless steel (SUS304), Throttle : Stainless steel (SUSXM7) |
| Skydd | IP67 (IEC) |
| Tillbehör | Connector (e-CON) : 1 pc. |
| Artikelnummer | DPH-L113 |
| Produktnamn | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] DPC-L100 / DPH-L100 |
| Tryckport | R1/4 male thread (throttle embeded) |
| Svarstid | 1 ms or less |
| Produktnummer | DPH-L113 |
| Matningsspänning | 9 to 36 V DC[9 to 32 V DC when using the attached connector (e-CON)] |
| Kabelförlängning | Extension up to total 10 m32.808 ftis possible with 0.2 mm2, or more, cable. |
| Omgivande luftfuktighet | 35 to 85 % RH, Storage : 35 to 85 % RH |
| Tillämplig vätska | Gases and fluids that do not corrode stainless steel SUS630, SUS304, or SUSXM7 |
| Jordningsmetod | Capacitor earth (Enclosure-supply terminal) |
| Stötdämpning | 1,000 m/s2acceleration in X, Y and Z directions three times each |
| Typ av tryck | Sealed gauge pressure(Note): The sensor's internal mechanism is sealed based on an air pressure of 1,013 hPa. |
| Anslutningsmetod | Connector |
| Omgivningstemperatur | -20 to +70 ℃-4 to +158 ℉(No dew condensation or icing allowed),\n Storage: -30 to +70℃-22 to +158 ℉ |
| Nuvarande förbrukning | 20 mA or less |
| Nominellt tryckområde | 0 to +1 MPa |
| Vibrationstålighet | 10 to 2,000 Hz frequency, acceleration 200 m/s2, in X direction for four hours, in Y and Z directions for two hours each(Note): The X, Y, and Z directions are defined as follows : |
| Analog spänningsutgång | Output voltage: 1 to 5 V DC (over rated pressure range)\n Accuracy: ±1.0 % F.S. (at 23 ±2 ℃+73.4 ±35 ℉)\n ±2.0 % F.S. (at -20 to 70 ℃-4 to +158 ℉)\n (including linearity, hysteresis and repeatability) |
| Isoleringsmotstånd | 100 MΩ, or more, with 50 V DC megger between all supply terminals connected together and enclosure |
| Tillämpliga bestämmelser | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Medeltemperaturintervall | -20 to +70 ℃-4 to +158 ℉ |
| Spänningshållbarhet | 150 V AC for one min. between all supply terminals connected together and enclosure |
| Trycktålighet | 2 MPa |
Produktbeskrivning
Sensor head, positive pressure. 0 to 1MPa. R1/4 male pressure port.
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
