I lager Het produkt
UBEA401
UBEA401 BE-A401 PANASONIC Optical Bubble Sensor for 4mm tube (NPN)
$0.00
USD
i lager
Viktiga specifikationer
Punkt:
Specifications
Kabel:
0.09 mm24-core cabtyre cable 1 m3.280 ft
Vikt:
Net weight: 15 g approx., Gross weight: 25 g approx.
Detaljer:
for ø4 mmø0.156 intube
Leverantörsinformation
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Punkt | Specifications |
| Kabel | 0.09 mm24-core cabtyre cable 1 m3.280 ft |
| Vikt | Net weight: 15 g approx., Gross weight: 25 g approx. |
| Detaljer | for ø4 mmø0.156 intube |
| Produkt | For small diameter tubes Optical Bubble Sensor |
| Material | Enclosure: PBT, Tube holder: Polyamide, Indicator: Polycarbonate |
| Artikelnummer | BE-A401 |
| Produktnamn | For small diameter tubes Optical Bubble Sensor BE-A |
| Produktnummer | BE-A401 |
| Avkännande objekt | Liquid(Note) Sensing is affected by dirt or residues adhered to the inner wall of the tube. Please maintain the tube regularly. |
| Matningsspänning | 5 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Kabelförlängning | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable.(Note)Confirm that the power supply voltage at the end of cable is more than 4.5 V when using an extension of over 20 m65.167 ft. |
| Klämmoment | 0.5N•m or less |
| Emitterelement | Infrared LED(Peak emission wavelength: 855 nm0.034 mil, non-modulated) |
| Detekterbar luftspalt | 0.8 mm0.032 inor more(Note) Sensing air gap refers to the width of an air bubble formed in the entire area of the inner diameter of the tube. Please note that this product cannot sense very small air bubbles or water drops. |
| Nuvarande förbrukning | 15 mA or less |
| Driftsindikator | Orange LED (lights up with absent liquid) |
| Skyddskretsar | Power supply reverse polarity protection , Output reverse polarity protection |
| Tillämplig rörtyp | Transparent resin tube (equivalent to flexible PVC)(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use. |
| Efterlevnadsregler | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Tillämplig rördiameter (ytterdiameter×innerdiameter) | ø4 mm × ø2.4 mmø5/32 in × ø3/32 in(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use. |
| Svarstid: Vid detektering av bubbla | 20 μs or less(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use. |
| Svarstid: Vid detektering av vätska | 80 μs or less(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use. |
| Utgång (Inbyggd med 2 utgångar) | NPN open-collector transistor•Maximum sink current: 50 mA•Applied voltage: 30 V DC or less (between output and 0 V)•Residual voltage: 2 V or less (sink current at 50 mA) 1 V or less (sink current at 16 mA) |
| Miljöbeständighet: Skydd | IP40 (IEC) |
| Miljöbeständighet: Omgivande luftfuktighet | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Miljöbeständighet: Stötdämpning | 100 m/s2acceleration in X, Y, and Z directions three times each |
| Miljöbeständighet: Omgivande belysningsstyrka | Fluorescent light: 1,000 ℓx at the light-receiving face |
| Miljöbeständighet: Omgivningstemperatur | -25 to +55 ℃-13 to +131 ℉(No dew condensation or icing allowed), Storage: -30 to +80 ℃-22 to +176 ℉(Note) Liquid being detected should also be kept within the rated ambient temperature range. |
| Miljöbeständighet: Vibrationsbeständighet | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each |
| Miljöbeständighet: Isoleringsmotstånd | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Miljöbeständighet: Spänningsbeständighet | 1,000 V AC for between one min. between all supply terminals connected together and enclosure |
| Utgång (inbyggd med 2 utgångar): Utgångsdrift | Switchable either Liquid-absent-ON or Liquid-present-ON |
| Utgång (inbyggd med 2 utgångar): Kortslutningsskydd | Incorporated |
Produktbeskrivning
Optical sensor for bubble detection in 4mm transparent probes and tubes, NPN digital output
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
