| Parameter | Värde |
|---|---|
| 120 V DC | |
| LED-lampa | no |
| Bredd | 58 mm |
| Höjd | 21 mm |
| Längd | 34 mm |
| Skärmad | no |
| Kabeltyp | PUR/PVC black [PUR] |
| Ansökan | Sensor/actuator box |
| Kabellängd | 5 m |
| Kabelvikt | 107.4 kg/km |
| Produkttyp | Connector hood |
| UL AWM-stil | 20549 (80°C/300 V) |
| Monteringsanteckning | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Övergripande twist | Wires twisted in layers |
| AWG-signalledning | 22 |
| Antal platser | 8 |
| Flammotstånd | DIN EN 50265 |
| Materialhölje | PBT |
| Annat motstånd | Highly resistant to acids, alkaline solutions and solvents |
| Anslutningsmetod | Pluggable screw connection |
| Motståndskraft mot olja | according to VDE 0472 Part 803 |
| Ledarmaterial | Bare Cu litz wires |
| Nominell spänning UN | 120 V AC |
| Enkel tråd, färg | brown, blue, green/yellow, white, green, yellow, gray, pink, red, black, violet |
| Särskilda egenskaper | Silicone-free |
| Måttritning | |
| Antal positioner | 11 |
| Skyddsgrad | IP65 |
| Märkström, totalt | 10 A |
| Isoleringsmotstånd | ≥ 5 MΩ*km |
| Yttre mantel, färg | black RAL 9005 |
| Inre manteltjocklek | ≥ 0.15 mm |
| Nominell spänning, kabel | 300 V AC |
| Yttermantel, material | PUR |
| Statusdisplay finns | No |
| Testspänning Kärna/Kärna | 2000 V (50 Hz, 5 min.) |
| Ledarens tvärsnitt | 8x 0.34 mm² (Signal line) |
| Ytterdiameter för kabeln | 8.50 mm ±0.2 mm |
| Tjocklek, yttermantel | ≥ 0.38 mm |
| Materialtrådisolering | PVC |
| Max ledarresistans | ≤ 53 Ω/km (Signal line) |
| Åtdragningsmoment, lockskruv | 0.35 Nm |
| Tråddiameter inkl. isolering | 1.3 mm ±0.1 mm (Signal line) |
| Omgivningstemperatur (drift) | -40 °C ... 90 °C (cable, fixed installation) |
| Ledarstruktur signalledning | 19x 0.15 mm |
| Dynamisk lastkapacitet (böjning) | Max. bending cycles: 1500000, Bending radius: 10 x D, Traversing path: 2 m, Traversing rate: 2 m/s |
| Sensor-/ställdonanslutningssystem | M12-SPEEDCON-socket |
| Strömbelastningskapacitet per kortplats | 4 A |
| Kontaktmaterial, huvudkabelsida | CU alloy |
| Max. strömbärande kapacitet per bana | 2 A |
| Plats/position = Ledarfärg eller anslutning | 1 / 4 (A) = WH |
| Minsta böjningsradie, fast installation | 64 mm |
| Minsta böjningsradie, flexibel installation | 10 x D |
| Minsta böjningsradie, rörlig installation | 85 mm |
| Material i kontaktyta, huvudkabelsida | gold-plated |
| Materialet i kontakthållaren på huvudkabelsidan | PA |
Tekniska specifikationer och prestandadata
Installations- och bruksanvisning