| Parameter | Värde |
|---|---|
| Status display I/O Yellow LED | |
| LED-lampa | yes |
| Bredd | 58 mm |
| Kodning | A |
| Höjd | 26 mm |
| Längd | 117 mm |
| Skärmad | no |
| Kabeltyp | PUR/PVC black [PUR] |
| Ansökan | Standard |
| Kabellängd | 10 m |
| Kabelvikt | 77.9 kg/km |
| Produkttyp | Distributor box |
| Testspänning | 2000 V |
| UL AWM-stil | 20549 |
| Monteringsanteckning | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Övergripande twist | Wires twisted in layers |
| AWG-signalledning | 22 |
| Antal platser | 4 |
| Kontaktmaterial | Cu alloy |
| Flammotstånd | DIN EN 50265 |
| Materialhölje | PBT |
| Annat motstånd | Highly resistant to acids, alkaline solutions and solvents |
| Lokal diagnostik | Supply voltage Green LED |
| Motståndskraft mot olja | according to VDE 0472 Part 803 |
| Ledarmaterial | Bare Cu litz wires |
| Övervakad funktion | Supply voltage |
| Nominell spänning UN | 24 V DC |
| Enkel tråd, färg | brown, blue, green/yellow, white, green, yellow, gray |
| Särskilda egenskaper | Silicone-free |
| Måttritning | |
| Anmärkning om ansökan | Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| Antal positioner | 4 |
| Skyddsgrad | IP65 |
| Märkström, totalt | 12 A |
| Tätningsmaterial O-ring | NBR |
| Standardbeteckning | M12 connector |
| Yttre mantel, färg | black RAL 9005 |
| Inre manteltjocklek | ≥ 0.15 mm |
| Nominell spänning, kabel | 300 V |
| Optisk representation | Green LED |
| Yttermantel, material | PUR |
| Statusdisplay finns | Yes |
| Ledarens tvärsnitt | 4x 0.34 mm² (Signal line) |
| Ytterdiameter för kabeln | 6.90 mm ±0.2 mm |
| Tjocklek, yttermantel | ≥ 0.38 mm |
| Kontaktbärarmaterial | PA |
| Kontaktytans material | gold-plated |
| Material Gängad hylsa | Die-cast zinc |
| Materialtrådisolering | PVC |
| Standarder/specifikationer | IEC 61076-2-101 |
| Material gjutmassa | PUR |
| Max driftspänning Umax | 30 V DC |
| Tråddiameter inkl. isolering | 1.3 mm ±0.1 mm (Signal line) |
| Omgivningstemperatur (drift) | -40 °C ... 90 °C (cable, fixed installation) |
| Ledarstruktur signalledning | 19x 0.15 mm |
| Dynamisk lastkapacitet (böjning) | Max. bending cycles: 1500000, Bending radius: 69 mm, Traversing path: 2 m, Traversing rate: 2 m/s |
| Sensor-/ställdonanslutningssystem | M12-SPEEDCON-socket |
| Strömbelastningskapacitet per kortplats | 4 A |
| Brandfarlighetsklassificering enligt UL 94 | V0 |
| Max. strömbärande kapacitet per bana | 2 A |
| Plats/position = Ledarfärg eller anslutning | 1 / 4 (A) = WH |
| Minsta böjningsradie, fast installation | 52 mm |
| Åtdragningsmoment för sensor-/ställdonkabel | 0.4 Nm |
| Minsta böjningsradie, flexibel installation | 10 x D |
| Minsta böjningsradie, rörlig installation | 69 mm |
| Åtdragningsmoment för monteringsskruv för fixering av höljet | 0.5 Nm |
Tekniska specifikationer och prestandadata
Installations- och bruksanvisning