| Parameter | Värde |
|---|---|
| High demand | |
| Djup | 112 mm |
| Chock | 15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.) |
| Bredd | 22.5 mm |
| Höjd | 114.5 mm |
| Kategori | 1 |
| inkopplingsbar | yes |
| Relätyp | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Ansökan | Safe switch off |
| Certifikat | CE-compliant |
| Utgångssäkring | 10 A gL/gG (N/O contact) |
| Produkttyp | Coupling relay |
| Omstartstid | < 1 s (Boot time) |
| Monteringstyp | DIN rail mounting |
| Återhämtningstid | < 500 ms |
| Stoppkategori | 0 |
| Inrusningsström | typ. 350 mA DC (Δt s) |
| Produktfamilj | PSRclassic |
| Färg (hölje) | yellow (RAL 1018) |
| Artikelrevision | 06 |
| Kontaktmaterial | AgSnO2 |
| Höljets material | Polyamide |
| Maximal höjd | max. 2000 m (Above sea level) |
| Avisoleringslängd | 8 mm |
| Anslutningsmetod | Push-in connection |
| Monteringsläge | vertical or horizontal |
| Kvadrat total ström | 48 A2 |
| Åtdragningsmoment | 0.6 Nm |
| Skyddskrets | Surge protection; Suppressor diode |
| Omkopplingskapacitet | min. 50 mW |
| Ingångsspänningsområde | 20.4 V AC/DC ... 26.4 V AC/DC |
| Anmärkning om ansökan | Only for industrial use |
| Skyddsgrad | IP20 |
| Typisk utlösningstid | typ. 15 ms (when controlled via A1) |
| Standarder/föreskrifter | DIN EN 50178 |
| Vibration (drift) | 10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.) |
| Kontaktbrytartyp | 3 enabling current paths |
| Maximal inrusningsström | 8 A |
| Nominellt driftläge | 100% operating factor |
| Prestandanivå (PL) | c |
| Inkopplingsström, minsta | 10 mA |
| Mekanisk livslängd | 10x 106cycles |
| Strömförbrukning i USA | typ. 1.08 W |
| Nominell isolationsspänning | 250 V |
| Maximal kopplingsspänning | 230 V AC/DC (Observe the load curve) |
| Minsta kopplingsspänning | 5 V AC/DC |
| Driftspänningsdisplay | 1 x green LED |
| Typisk starttid hos oss | typ. 15 ms (when controlled via A1) |
| Ledartvärsnitt AWG | 24 ... 16 |
| Begränsande kontinuerlig ström | 6 A (N/O contact) |
| Maximal switchfrekvens | 0.5 Hz |
| Säkerhetsintegritetsnivå (SIL) | 1 |
| Ledartvärsnitt stelt | 0.2 mm² ... 1.5 mm² |
| Nominell stötspänning/isolering | 4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.) |
| Omgivningstemperatur (drift) | -20 °C ... 55 °C |
| Nominell styrström IS | typ. 45 mA |
| Ledartvärsnitt flexibelt | 0.2 mm² ... 1.5 mm² |
| Avbrottsklassning (ohmsk belastning) max. | For additional values, see load curve |
| Omgivningstemperatur (lagring/transport) | -40 °C ... 70 °C |
| Nominell styrkretsens matningsspänning US | 20.4 V AC/DC ... 26.4 V AC/DC |
| Minsta skyddsgrad för installationsplats | IP54 |
| Maximal avbrottsklassning (induktiv belastning) | 48 W (N/O contact, 24 V DC, τ = 40 ms) |
| Max tillåten luftfuktighet (lagring/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max tillåten relativ luftfuktighet (drift) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximal effektförlust vid nominellt tillstånd | 6.11 W (at UB= 26.4 V DC, US= 24 V, IS= 45 mA, n = 1, IL² = 48 A², Rcontact= 0.1 ) |
| Brytkapacitet enligt IEC 60947-5-1 | 5 A (24 V (DC13)) |
| Ledartvärsnitt, flexibelt, med ändhylsa, med plasthylsa | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Ledararea flexibel, med ändhylsa utan plasthylsa | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
Tekniska specifikationer och prestandadata
Installations- och bruksanvisning