| Parameter | Värde |
|---|---|
| High demand | |
| Djup | 114.5 mm |
| Chock | 15g |
| Bredd | 12.5 mm |
| Höjd | 116.6 mm |
| Nuvarande | max. 100 mA |
| Spänning | approx. 22 V DC (UD- 2 V) |
| inkopplingsbar | yes |
| CCCex-anteckning | Use in potentially explosive areas is not permitted in China. |
| Relätyp | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Ansökan | Safe switch off |
| Certifikat | UL 22 ATEX 2912X |
| Beteckning | A1/A2 |
| Filtertid | max. 2 ms (at A1-A2; test pulse width) |
| Utgångssäkring | 6 A gL/gG (N/O contact 13/14) |
| Produkttyp | Coupling relay |
| Monteringsanteckning | See derating curve |
| Monteringstyp | DIN rail mounting |
| Återhämtningstid | 500 ms |
| Stoppkategori | 0 |
| Identifiering | II 3G Ex ec nC IIC T4 Gc |
| Inrusningsström | typ. 400 mA (Δt s) |
| Produktfamilj | PSRmini |
| Statusvisning | 1 x LED (green) |
| Färg (hölje) | yellow (RAL 1018) |
| Artikelrevision | 07 |
| Kontaktmaterial | AgSnO2 |
| Felindikering | 1 x LED (red) |
| Höljets material | Polyamide |
| Maximal höjd | ≤ 2000 m (Above sea level) |
| Avisoleringslängd | 8 mm |
| Anslutningsmetod | Push-in connection |
| Monteringsläge | vertical, horizontal, with front of module upward |
| Antal utgångar | 1 (safety-related N/O contacts: 13/14 (13F/14)) |
| Kvadrat total ström | 36 A2(13/14, see to derating) |
| Omkopplingsspänning | min. 12 V AC/DC |
| Beskrivning av utgången | 2 N/O contacts in series, without delay, floating |
| Skyddskrets | Serial protection against polarity reversal; Suppressor diode 33 V |
| Omkopplingskapacitet | min. 60 mW |
| Ingångsström vid UD | 6 mA (at 31-A2 for UD; depending on load + 100 mA at M1 and 32) |
| Anmärkning om ansökan | Only for industrial use |
| Switchfrekvens | max. 0.5 Hz |
| Skyddsgrad | IP20 |
| Inkopplingsström vid UD | typ. 2.5 A (Δt D) |
| Typisk utlösningstid | < 35 ms (when controlled via A1) |
| Standarder/föreskrifter | EN 60664-1, EN 60079-7, EN 60079-15 |
| Vibration (drift) | 10 Hz ... 150 Hz, 2g |
| Kontaktbrytartyp | 1 enabling current path |
| Maximal inrusningsström | 500 mA (Δt = 1 ms at Us) |
| Nominellt driftläge | 100% operating factor |
| Mekanisk livslängd | 10x 106cycles |
| Strömförbrukning i USA | typ. 1.2 W |
| Nominell isolationsspänning | 250 V AC |
| Kortslutningsskydd | no |
| Driftspänningsdisplay | 1 x yellow LED |
| Typisk starttid hos oss | < 100 ms (with Uswhen controlled via A1) |
| Ledartvärsnitt AWG | 24 ... 16 |
| Begränsande kontinuerlig ström | 6 A (13/14 for high-demand) |
| Diagnostisk matningsspänning UD | 24 V DC -15 % / +10 % |
| Säkerhetsintegritetsnivå (SIL) | 3 |
| Ledartvärsnitt stelt | 0.2 mm² ... 1.5 mm² |
| Nominell stötspänning/isolering | Safe isolation, 6 kV reinforced insulation from control circuit, start circuit, confirmation current path, signal output to the enabling current path; 4 kV/basic insulation between all current paths and housing |
| Omgivningstemperatur (drift) | -40 °C ... 70 °C (observe derating) |
| Nominell styrström IS | typ. 50 mA |
| Ledartvärsnitt flexibelt | 0.2 mm² ... 1.5 mm² |
| Omgivningstemperatur (lagring/transport) | -40 °C ... 85 °C |
| Nominell styrkretsens matningsspänning US | 20.4 V DC ... 26.4 V DC |
| Minsta skyddsgrad för installationsplats | IP54 |
| Max tillåten luftfuktighet (lagring/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max tillåten relativ luftfuktighet (drift) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximal effektförlust vid nominellt tillstånd | 3.43 W (IL² = 36 A²) |
| Brytkapacitet enligt IEC 60947-5-1 | 4 A (24 V (DC13); N/O contact 13/14) |
| Ledartvärsnitt, flexibelt, med ändhylsa, med plasthylsa | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Ledararea flexibel, med ändhylsa utan plasthylsa | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
Tekniska specifikationer och prestandadata
Installations- och bruksanvisning