I lager Het produkt
HL-C201FE
HL-C201FE PANASONIC Sensorhead HL-C2, Laserclass 1, 10±1mm, 0.25μm, Spottype
$0.00
USD
i lager
Viktiga specifikationer
Punkt:
Specifications
Kabel:
Cabtyre cable, 0.5 m 1.640 ft long with connector
Vikt:
250 g approx. (including cable)
Detaljer:
Sensor head (Small size Super-high precision)
Leverantörsinformation
PANASONIC
Produkter: 4316
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Punkt | Specifications |
| Kabel | Cabtyre cable, 0.5 m 1.640 ft long with connector |
| Vikt | 250 g approx. (including cable) |
| Detaljer | Sensor head (Small size Super-high precision) |
| Produkt | Ultra High-speed High-precision Laser Displacement Sensor |
| Material | Enclosure: Die-cast aluminumCase cover: Die-cast aluminumFront cover: Glass |
| Åtföljande | English warning label: 1 set [The FDA regulations conforming type includes a set of both the IEC label (written in English) and JIS label (written in Japanese)]. |
| Linjäritet | plus or minus 0.025 % F.S.(Note) Indicates error with respect to the ideal linear values for digital displacement output when standard objects were measured by our company. It may vary depending on the types of objects being measured. |
| Inställningsläge | Specular reflective |
| Artikelnummer | HL-C201FE |
| Ljuskälla | Red semiconductor laser (Peak emission wavelength: 658 nm 0.026 mil)Class 1 (IEC / JIS / FDA, Laser Notice No.50),Max. output: 0.1 mW |
| Produktnamn | Ultra High-speed・High-precision Laser Displacement Sensor HL-C2 |
| Stråldiameter | dia. 20 micro m dia. 0.787 mil approx.(Note) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2 (13.5 %) of the center light intensity.If there is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than the sensing point itself, then the results may be affected. |
| Produktnummer | HL-C201FE |
| Kabelförlängning | Extension up to total 30 m 98.425 ft is possible, with optional cable. |
| Mätområde | plus or minus 1 mm plus or minus 0.039 in(Note) Measuring range at sampling periods of 20 micro s and 10 micro s is as follows.20 micro s: +0.1 to +1.0 mm +0.004 to +0.039 in10 micro s: +0.8 to +1.0 mm +0.032 to +0.039 in |
| Mottagande element | Linear image sensor |
| Indikator: Laseremission | Green LED (lights up during laser emission) |
| Indikator: Mätområde | Yellow LED(lights up when near the measurement center distance, blinks when within the measuring range, and lights out when outside of the measuring range.) |
| Mätcentrumavstånd | 10 mm 0.394 in |
| Temperaturegenskaper | 0.013% F.S./℃ |
| Miljöbeständighet: Skydd | IP67 (IEC) (excluding the connector) |
| Upplösning [Genomsnittligt antal prover] | 0.25 micro m 0.010 mil [256](Note) The P-P value for the deviation in the digital measurement values at the measurement center range has been converted for the measurement center distance. |
| Miljöbeständighet: Omgivande luftfuktighet | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Miljöbeständighet: Stötdämpning | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each |
| Miljöbeständighet: Omgivande belysningsstyrka | Incandescent light: 3,000 liter x at the light-receiving face |
| Miljöbeständighet: Omgivningstemperatur | 0 to +45 degrees +32 to +113 degrees Fahrenheit (No dew condensation), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Miljöbeständighet: Vibrationsbeständighet | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in amplitude in X,Y and Z directions for two hours each |
Produktbeskrivning
More details
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
