I lager Het produkt
HBG-100-36B
HBG-100-36B MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 36VDC / 2.7A, IP67, for in- and..
$0.00
USD
i lager
Viktiga specifikationer
Namn:
HBG-100-36B
Ange:
Recommended Model
Stock:
Yes
Formatera:
Box
Leverantörsinformation
MEANWELL
Produkter: 6448
Skickas vanligtvis inom 2-3 arbetsdagar
Kvalitetsgaranti
Snabb leverans
Teknisk support
Tekniska specifikationer
| Parameter | Värde |
|---|---|
| Namn | HBG-100-36B |
| Ange | Recommended Model |
| Stock | Yes |
| Formatera | Box |
| Serie | HBG-100-B |
| Dimning | 1-10V, Resistance 0-100K, PWM Signal 10V |
| Godkännanden | CCC, CE, ENEC, UL |
| Effekt (W) | 97,20 |
| Subformat | IP67 |
| Bredd (mm) | 130.00 |
| Höjd (mm) | 66.50 |
| Max AC-ingång | 305,00 |
| AC-ingång Min | 90,00 |
| Applikationer | Lighting |
| Tillverkare | MEAN WELL |
| Produkttyp | LED Driver |
| Isolering (V) | 3.750,00 |
| Toppeffekt (W) | 97.2 |
| Ingångskontakt | Cable |
| Ingångsfrekvens | 50 Hz, 60 Hz |
| Lång/Bakgrund | 130.00 |
| Lång beskrivning | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format, round, plastic, patented, waterproof,IP67.Input range90-305Vca47-63Hz.Output in constant current2,7 A.Range of output voltage with current mode constant21.6 to 36Vccaccording to demand load.Power:From 97.2 W.Efficiency typical:91%.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0.96to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+85ºC.Dimensions (Diameter x Height):130 x 66,5 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current.With shell circular plastic IP67. The series HBG is specially designed for the bells and LED spotlights, scenarios, and bays. Intended for applications in dry, damp or wet, both in exterior and in interior. Input class I with grounding.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Utgångskontakt | Cable |
| Typ av inträde CA | Single-phase |
| Garanti (år) | 5,00 |
| Ursprungsland | China |
| Utgångsström mA | Two thousand seven hundred |
| Intensitet för minsta uteffekt (mA) | 2.700,00 |
| Maximal uteffekt (mA) | 2.700,00 |
Produktbeskrivning
More details
Viktiga funktioner
- Industriell kvalitet
- RoHS-kompatibel
- CE-certifierad
- 1 års garanti
Tekniska detaljer
LED driver dimmable.
Produktdokument
Datablad
Tekniska specifikationer och prestandadata
Användarmanual
Installations- och bruksanvisning
