| Parameter | Värde |
|---|---|
| When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules. | |
| Säkring | electronic |
| Notera | LABS release – in accordance with test specification VW PV 3.10.7:2005-0 |
| Djup | 111.3 mm (incl. DIN rail 7.5 mm) |
| Bredd | 12.4 mm |
| Höjd | 132.4 mm |
| Höjd över havet | ≤ 4000 m (amsl) |
| Material | PA 6 |
| Effektivitet | > 99 % |
| Produkttyp | Device circuit breakers |
| Spänningsfall | 0.06 V (at 4 A) |
| Fuktighetstest | 96 h, 95 % RH, 40 °C |
| Monteringstyp | pluggable onto CAPAROC CR… current rail |
| Märkspänning | 12 V DC |
| Avstängningstid | 5 s (with overload 1.1…1.3 x INat IN≥ 4 A) |
| Identifiering | UL/C-UL Listed UL 508 |
| Produktfamilj | CAPAROC |
| Kanal-LED av | off (Channel switched off) |
| Kanal-LED röd | lit (Channel switched off, over- or undervoltage active) |
| Antal kanaler | 2 |
| Antal platser | 2 |
| Tillslagsfördröjning | 50 ms (each channel preset by default) |
| Utlösningsmetod | E (electronic) |
| Föroreningsgrad | 2 |
| Skyddsklass | III |
| Märkström IN | 4 A DC (per channel) |
| Avisoleringslängd | 10 mm |
| Kanal-LED grön | lit (Channel switched on) |
| Anslutningsmetod | Push-in connection |
| Tvärsnitt AWG | (converted acc. to IEC) |
| Felsäkert element | 5 A DC (per output channel) |
| Driftspänning | 10 V DC ... 30 V DC |
| Effektförlust | typ. 0.6 W (no load at 24 V) |
| Stöt (operation) | 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) |
| Kanal-LED gul | lit (Channel switched on, channel load > 80% ) |
| Dielektrisk styrka | 35 V DC (Load circuit) |
| Måttritning | |
| Återkopplingsmotstånd | max. 35 V DC |
| Antal positioner | 1 |
| Nominell stötspänning | 0.5 kV |
| Skyddsgrad | IP20 |
| Max kapacitiv belastning | ≤ 60000 µF (Depending on the current setting and the short-circuit current available) |
| Nödvändig försäkringssäkring | Only required if Imaxof the power supply > the short-circuit switching capacity. Integrated failsafe element. |
| Kanal-LED röd-grön | flashing (Channel switched off, programming mode active, current adjustment after overload or short-circuit release) |
| Mätning av tolerans I | ± 10 % (typ.) |
| Vibration (drift) | 5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z) |
| Kanal-LED röd-gul | flashing (Channel is overloaded and is switched off) |
| Överspänningsavstängning | ≥ 32.5 V DC (active) |
| Underspänningsavstängning | ≤ 8.5 V DC (active) |
| Standarder/specifikationer | EN 61000-6-2 |
| Aktiv strömbegränsning | typ. 2.0 x INat IN≤ 3 A |
| Slutkretsström I0 | typ. 25 mA (no load at 24 V) |
| MTBF (IEC 61709, SN 29500) | 11364927 h (at 25 °C with 21 % load) |
| Ledarens tvärsnitt AWG | 24 ... 12 |
| Märkström (förinställd) | 1 A |
| Ledartvärsnitt stelt | 0.2 mm² ... 4 mm² |
| Omgivningstemperatur (drift) | -30 °C ... 65 °C (The temperature range of the power module must be taken into consideration) |
| Ledartvärsnitt flexibelt | 0.2 mm² ... 4 mm² |
| Kortslutningsbrytningskapacitet | 300 A |
| Brandfarlighetsklassificering enligt UL 94 | V-0 |
| Omgivningstemperatur (lagring/transport) | -40 °C ... 70 °C |
| Ledartvärsnitt, flexibelt, med ändhylsa, med plasthylsa | 0.25 mm² ... 4 mm² |
| Ledararea flexibel, med ändhylsa utan plasthylsa | 0.25 mm² ... 4 mm² |
Tekniska specifikationer och prestandadata
Installations- och bruksanvisning